HV6900 Now Available! Click here

The Spray Station 5000 is a professional unit designed for light contractor, occasional maintenance, woodworker and serious DIY enthusiast. The Spray Station 5000 is ideal for use in the workshop, garden or home. Water-based and oil-based coatings can be applied with the HV5000.

This model is supplied with onboard storage for spray gun, long carry handle for easy portability, spray gun cleaning kit and 1 quart pro-gun with Teflon®-coated paint container which is easy to clean, long lasting and non-corrosive.

• Ideal for spraying walls, ceilings, doors, fences, shutters, cabinetry, spindles, iron work, sheds, decking, furniture and cars
• Easy to clean Teflon-coated paint container with quick release lever
• 13 ft air hose
• 5.5 ft power cord
• Can spray a wide variety of materials
• Sprays as fine as 1 inch/2.5cm
• Fitted with variable output control
• Press and twist aircap for faster spray pattern adjustment
• Optional needle sets

Technical Specs

• 1 quart capacity
• Turbine motor
• Neon on/off switch
• Kit includes: turbine unit, onboard storage pod, onboard hose and power cord storage, 1 quart Teflon-coated paint container with metal spray gun and stainless steel needle, viscosity cup, long carry handle and spray gun cleaning kit

Hints & Tips

• Preparation is essential - remember to mask around the areas you are not spraying.
• Take a minute to ensure paint viscosity is correct- thin paint as necessary using water or relevant thinners.
• If you've never sprayed before, 1-2 minutes practice on cardboard to develop your technique will ensure you get a great result.
• Allow time for drying between coats.
• Fine mists will generally dry faster than heavier coats. This will allow you to build up coats faster and there is less likelihood of runs.
• Avoid spraying when windy.

Spare Parts

Click for larger image

1. Air Cap Ring L0151
2. Air Cap L0152
3. Air Distributor Plate Assy L0162
4. Fluid Tip, 0.08” L0157
5. Fluid Tip Seal L0159
6. Pivot Screw L0179
7. Washer L0195
8. Main Body Assy L0180
9. Fluid Needle 0.08” L0166
10. Adaptor L0174
11. Spring L0175
12. Adjusting Screw L0176
13. Pivot L0178
14. Air Feed Tube L0182
15. Gland Nut L0173
16. Gland Washer (2 pcs) L0168
17. Paint Container L0190
18. Centre Bolt Nut L0189
19. Gasket L0188
20. Lid Assy L0187
21. Shim L0186
22. Clamp Lever L0185
23. Yoke L0184
24. Centre Bolt & Pick Up Tube Assy L0183
25. Operating Lever L0177
26. Viscosity Cup SG243
27. Spanner L0191
28. Filter (not shown) L0058